Nortel Networks Sun Fire V100 - Manual (Page 168)

NN10287-301 MCS 5100 3.5 Standard 5.0 December 2006
168 Copyright © 2006 Nortel Networks
Gatekeeper. This value is added to the SIP URI and is
required for the MCS 5100 H.323 Gatekeeper to route calls
to the appropriate H.323 endpoint. In this example, the
gateway is
Example
Gateway host:
enterprise.com;maddr=47.104.11.195:5070;h
323_endpoint=Harry-GW1
Gateway type: Harry-GW1-on-gatekeeper3
6 Calls can now route to and from the SIP applications and H.323
Gatekeeper and endpoints.
7 At this point administrators should configure their dialing plan
support.
Verification procedures
Sun Fire V100 H.323 Gatekeeper server verification
The following commands are executed on the AppSvr V100 using
PuTTY SSH into the machine logical IP address.
Example: Open a PuTTY SSH session to 120.120.12.34
Procedure 49 Verifying the H.323 Gatekeeper
At the management pc,
1 Log into the server as nortel/<new nortel user password>.
2 After installing the MCS Base Platform System Software CDs
1-6, execute the following command to verify IP addressing.
@mcsappsvr]/export/home/nortel:=> ifconfig -a
lo0:
flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4>
mtu 8232 index 1 inet 127.0.0.1 netmask ff000000
dmfe0:
flags=9040843<UP,BROADCAST,RUNNING,MULTICAST,DEP
RECATED,IPv4,NOFAILOVER> mtu 1500 index 2 inet
120.120.12.32 netmask ffffff00 broadcast 120.120.12.255
groupname imspub
dmfe0:1:
flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4
> mtu 1500 index 2 inet 120.120.12.34 netmask ffffff00
broadcast 120.120.12.255