Nortel Networks Sun Fire V100 - Manual (Page 72)

NN10287-301 MCS 5100 3.5 Standard 5.0 December 2006
72 Copyright © 2006 Nortel Networks
3 Select the correct database load and press Enter.
4 Is this a Replicated Database? Enter N for a
non-redundant system.
Note: If you have a database backup from a previous MCS
installation, enter the number 4 instead.
5 You will see the following message:
Select the Type of Deployment:
[1] Initial Deployment
[2] Upgrade of Database
[3] Rollback of Database
[4] Install Files only
to
Select 1 for initial deployment, then press Enter.
6 Enter Machine Logical IP Address - Primary DB
[No default]
:
Enter the <machine logical IP address of the DBSvr>
Example: 192.168.14.21
7 Enter the Machine Logical IP address - MgmtSvr:
<machine logical IP address of the MgmtSvr>
Example: 192.168.14.11
8 Enter the Service Logical IP SysMgr: <service
logical IP address of the SysMgr>
Example: 192.168.14.11
Note: Information obtained for database deployment appears
on the screen.
9 Is the above data correct? [Y]
Press Y to select the default.
Note: The imssipdb deployment begins. The installer will
notice the PuTTY window scrolling installation information.
This is the MgmtSvr sending the imssipdb data to the
database server. Make sure that you receive the "Successful
Install" box at the end of the script execution.