NETGEAR 7200 Series Layer 2 Managed Switch Software - Manual (Page 37)

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Quick Startup 6-5
202-10010-01
Default Gateway - The default Gateway for this interface
Default value is 0.0.0.0
Burned in MAC Address - The Burned in MAC Address used for
in-band connectivity
Locally Administered MAC Address - Can be configured to allow
a locally administered MAC address
MAC Address Type - Specifies which MAC address should be
used for in-band connectivity
Network Configurations Protocol Current - Indicates which
network protocol is being used
Default is DHCP
Java Mode - Specifies whether the switch should allow the Java
applet to show the interactive switch graphic (see
“Interactive
Switch Image” on page 5-3 )
Default is enable
config network parms config network parms <ipAddr> <Mask> <gateway>
IP Address range from 0.0.0.0 to 255.255.255.255
Subnet Mask range from 0.0.0.0 to 255.255.255.255
Gateway Address range from 0.0.0.0 to 255.255.255.255
Table 6-4. Quick Startup IP Address
Command Details