Transfer download start, Clear transfer, Clear config – NETGEAR 7200 Series Layer 2 Managed Switch Software User Manual
Page 120: Clear pass, Clear traplog, Clear vlan, Transfer download start -78, Clear transfer -78, Clear config -78, Clear pass -78
User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
7-78
Switching Commands
202-10010-01
transfer download start
This command starts a download transfer after displaying current settings and upon confirmation.
Format
transfer download start
clear transfer
This command resets the file transfer configured values to the factory defaults.
Format
clear transfer
clear config
This command resets the configuration to the factory defaults without powering off the switch.
The switch is automatically reset when this command is processed. You are prompted to confirm
that the reset should proceed.
Format
clear config
clear pass
This command resets all user passwords to the factory defaults without powering off the switch.
You are prompted to confirm that the password reset should proceed.
Format
clear pass
clear traplog
This command clears the trap log.
Format
clear traplog
clear vlan
This command resets VLAN configuration parameters to the factory defaults.
Format
clear vlan