Config garp leavealltimer, Show igmpsnooping, Config garp leavealltimer -38 – NETGEAR 7200 Series Layer 2 Managed Switch Software User Manual

Page 80: Show igmpsnooping -38

Advertising
background image

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software

7-38

Switching Commands

202-10010-01

config garp leavealltimer

This command sets how frequently Leave All PDUs are generated per port. A Leave All PDU
indicates that all registrations will be unregistered. Participants would need to rejoin in order to
maintain registration. The value applies per port and per GARP participation. The time may range
from 200 to 6000 (centiseconds).

Note:

This command has an effect only when GVRP is enabled.

Default

1000 centiseconds (10 seconds)

Format

config garp leavealltimer <slot.port/all> <200-6000>

show igmpsnooping

This command displays IGMP Snooping information. Configured information is displayed
whether or not IGMP Snooping is enabled. Status information is only displayed when IGMP
Snooping is enabled.

Format

show igmpsnooping

Admin Mode

This indicates whether or not IGMP Snooping is active on the switch.

Query Interval Time

This displays the IGMP Query Interval Time. This is the amount of time a
switch will wait for a report for a particular group on a particular interface
before it sends a query on that interface. This value may be configured

Max Response Time

This displays the amount of time the switch will wait after sending a query on an
interface because it did not receive a report for a particular group on that
interface. This value may be configured.

Multicast Router Present

Expiration Time

If a query is not received on an interface within this amount of time, the
interface is removed from the list of interfaces with multicast routers attached.
This value may be configured.

Interfaces Enabled for

GMP Snooping

This is the list of interfaces on which IGMP Snooping is enabled.

The following status values are only displayed when IGMP Snooping is enabled.

Multicast Control Frame

Count

This displays the number of multicast control frames that are processed by the
CPU.

Data Frames Forwarded

by the CPU

This displays the number of data frames that are forwarded by the CPU.

Advertising