Navini Networks Ripwave 40-00097-00 - Manual (Page 16)

Ripwave Modem User Guide Navini Networks, Inc.
16 Copyright © 2003 Navini Networks, Inc. All rights reserved. Part #40-00097-00 Rev E v1.0
July 30, 2003
Installing a USB Modem,
continued
Step Action
Illustration
4. Rotate the antenna on
the Ripwave Modem
180 degrees to the UP
position. This reveals
the Modem’s indicator
lights.
CAUTION! Rotation of
the antenna in any other
direction may cause
damage to the Modem.
5. Push the ON/OFF
button on the Modem
to ON.
6. If the Green Power
indicator light comes on,
proceed to Step 7. If not,
there is a problem with
the Modem or the AC
Power Adapter. Check
all cables for proper
connection. Otherwise,
contact the supplier
from whom you
obtained the package.
Signal Strength
Indicator (SSI)
Power
Indicator
Battery
Indicator
Antenna
Signal Strength
Indicator (SSI)
Power
Indicator
Battery
Indicator
Antenna
On/Off
Switch
2.4 GHz 2.3, 2.5 &
2.6 GHz
On/Off
Switch
2.4 GHz 2.3, 2.5 &
2.6 GHz
Power
Indicator
Power
Indicator