Navini Networks Ripwave 40-00097-00 - Manual (Page 30)

Ripwave Modem User Guide Navini Networks, Inc.
30 Copyright © 2003 Navini Networks, Inc. All rights reserved. Part #40-00097-00 Rev E v1.0
July 30, 2003
2.3 GHz, 2.5 GHz
& 2.6 GHz Battery
Step Action
Illustration
1. Applying light pressure,
push the tab on the
battery pack cover to
remove it from the
bottom of the Modem.
2. Install the battery pack
into the Modem,
ensuring that the
contacts mate and that
both sides snap down
securely.
Reinstall the battery
pack cover on the
Modem.
3. To charge the battery,
connect the AC adapter
to the Modem and to an
AC power source. The
battery will begin
charging immediately
regardless of whether
the On/Off switch is on.
However, the pack will
charge faster if the
on/off switch is in the
OFF position.
If the on/off switch is
ON, the light indicator
will be constant yellow.
When fully charged, the
light will go off.
Battery
Indicator
.
Battery
Indicator
.
Battery Pack Cover tab Battery Pack Cover tab
Battery contacts Battery contacts