NEC NP40 - Manual (Page 47)

39
5. Using On-Screen Menu
Adjusting Contrast, Brightness, Sharpness, Color and Hue
You can adjust contrast, brightness, sharpness, color and hue.
TIP: When one of Contrast, Brightness, Sharpness, Color or Hue is highlighted, pressing the ENTER button will display its slide
bar for adjustment.
Contrast ................ Adjusts the intensity of the image according to the incoming signal (White level of the image).
Brightness ............. Adjusts the brightness level or the black level of the image.
Sharpness ............. Controls the detail of the image for Video (not valid for RGB).
Color ...................... Increases or decreases the color saturation level (not valid for RGB).
Hue ........................ Varies the color level from +/- green to +/-blue. The red level is used as reference. This adjustment is
only valid for Video and Component inputs (not valid for RGB).
Input signal Contrast Brightness Sharpness Color Hue
Computer (RGB) Yes Yes No No No
Component Yes Yes Yes Yes* Yes*
Video, S-Video Yes Yes Yes Yes Yes
Yes=Adjustable, No=Not adjustable, Yes* = depending on the signal
Reset
The settings and adjustments for [Picture] will be returned to the factory settings with the exception of the follow-
ing; Preset numbers and [Reference] within the [Preset] screen.
The settings and adjustments under [Detail Settings] within the [Preset] screen that are not currently selected will
not be reset.
➎ Menu Descriptions & Functions [Image Options]
Selecting Aspect Ratio [Aspect Ratio]
Aspect Ratio allows you to select the best Aspect mode to display your source image.
You can also display the Aspect Ratio window by pressing the ASPECT button on the remote control. (
→ page
7 )
Normal
Standard
4:3 Aspect
When 16:9 is selected from the source (i.e.
DVD player), the following selections will dis-
play:
Normal
16:9 image
displayed in 4:3
mode
Cinema Native
Left and right
stretched
Cinema
Left and right
stretched to display
the true aspect
When 4:3 is selected from the source (i.e. DVD
player), the following selections will display:
Native (RGB only): Turns off the scaling feature. The projector displays the current image in its true resolution.