NEC NP40 - Manual (Page 53)

45
5. Using On-Screen Menu
❼ Menu Descriptions & Functions [Information]
Displays the status of the current signal and lamp usage. This item has three pages. The information included is
as follows:
[Usage Time]
[Source]
[Horizontal Frequency] [Vertical Frequency]
[Video Type] [Sync Type]
[Sync Polarity] [Scan Type]
Selecting Signal Format [Signal Select]
[Video & S-Video System Select]
This feature enables you to select video standards automatically or manually.
In the case where the projector has diffi culty detecting the video standard, select the appropriate video standard
from the menu. This must be done for Video and S-Video respectively.
TIP: The projector automatically detects a component signal.
[Lamp Life Remaining] (%)*
[Lamp Hours Used] (H)
* The progress indicator shows the percentage of remaining bulb life.
The value informs you of the amount of lamp usage. When the remaining lamp time reaches 0, the Remaining
Lamp Time bar indicator changes from 0% to 100 Hours and starts counting down.
If the remaining lamp time reaches 0 hours, the projector will not turn on regardless of whether the lamp mode
is set to Normal or Eco.
Product
Lamp life(H)
Replacement lamp
Normal Eco
NP60
2000 3000
NP03LP
NP50/NP40 NP02LP