NEC MT830 - Manual (Page 10)

E-9
Terminal Panel Features
This panel is located on the left side and is where you connect your
cables.
1 S-Video Input
Here is where you connect the S-Video input from an exter-
nal source like a VCR.
Left Channel/Mono Audio Input Jack
This is your left channel audio input for stereo sound coming
from S-Video equipment or audio system. This also serves
as your monaural audio input.
Right Channel Audio Input Jack
This is your right channel audio input for stereo sound.
NOTE: S-Video provides more vivid color and higher
resolution than the traditional composite video format.
2 Video Input
Connect a VCR, DVD player, laser disc player, or document
camera here to project video.
Left Channel/Mono Audio Input Jack
This is your left channel audio input for stereo sound coming
from video equipment or audio system. This also serves as
your monaural audio input.
Right Channel Audio Input Jack
This is your right channel audio input for stereo sound.
3 RGB Monitor Output Connector (Mini D-Sub 15
pin)
You can use this connector to loop your computer image to
an external monitor from either the RGB 1 or RGB 2 input
source.
Audio Output Mini Jack
Connect additional external speakers here to listen to audio
coming from your computer, Video or S-Video input.
4 RGB Input 1 Connector (Mini D-Sub 15 pin)
Connect your PC or other RGB equipment such as IBM or
compatible computers. Use the signal cable that's supplied to
connect to a PC. Or connect a Macintosh or compatible
computer here using the signal cable and the pin adapter that
is supplied.
RGB 1 Audio Input Mini Jack
This is where you connect RGB audio output from a com-
puter or another RGB source.
PC CONTROL MOUSE OUTPUT REMOTE
CONTROL
INPUT
AUDIO R G B I N P U T 2 AUDIO R G B I N P U T 1
AUDIO R G B M O N I T O R O U T P U T
R L / M O N O
I N P U T A U D I O S – V I D E O
R L / M O N O
I N P U T A U D I O V I D E O
1 3
2 4