NEC MT830 - Manual (Page 9)

E-8
Top Features
1 Power Button
Use this button to turn the power on and off when the Main
Power Switch is on and the LCD projector is in standby.
2 Menu Button
Displays the on- screen menu.
3 Select ( ▲▼ ᮤ ᮣ ) / (+)(–) Buttons
Select: After you press the “Menu” button, use the ▲ or
▼ button to select the menu icon of the item you
wish to adjust.
(+)(–): Use these buttons while you' re in the Image
Adjust mode to change the level of a selected
menu item. These buttons are also used to set an
item in the Power or Settings menus.
4 Enter Button
Executes your menu selection.
5 (+) (–) Zoom Buttons
Press the (+) button to make the image larger; press (–) to
make the image smaller.
6 (+) (–) Focus Buttons
Press the (+) or (–) buttons to focus an image.
7 Power Indicator
When this indicator is green, the LCD projector is on; when
the indicator is amber, it is standing by.
8 Status Indicator
When this is lit red continually, it's warning you that the
projection lamp has exceed 2000 hours of service. After this
light appears, it is advisable to replace the projection lamp as
soon as possible.(See page E-37)
In addition the message "LAMP USAGE XX HOURS"
appears continually when the on-screen menu is not dis-
played.
If this light blinks red rapidly, it indicates that either the lamp
cover or filter cover is not attached properly. See the Status
Light Messages on page E-39 for more details.
MENU
SELECT
ENTER
ON/OFF
ZOOM FOCUS
STATUS
POWER
–
+
–
+
–
+
2
3
4
6
5 1
8
7
(▲▼ ᮤ ᮣ )