NEC MT830 - Manual (Page 37)

E-36
Switching Slides
To switch slides, press "SLIDE +" or "SLIDE -" button. This will
cancel the Auto Play mode. To set the Auto Play mode, press the
Menu button to select “Start” from the Source menu and press the
Enter button on the cabinet or the Left Click button on the remote
control. This is valid only when the Auto Play mode is selected.
See more information about “Auto Play mode” for the Help file
included with the Viewer board.
* SLIDE- returns to the previous slide.
SLIDE+ advances to the next slide.
NOTE: Editing tasks such as deleting the data inside the flash
memory card cannot be accomplished with the LCD projector.
Use the exclusive software on your PC for this purpose. If you
accidentally delete data required for playback, playing back
the data is not possible.
Effect Sound
The Viewer function allows you to play back effect sound for the
slide.
Playing back effect sound can be accomplished during the
switching slides or files only. To use this feature, you must first
specify the effect sound with the supplied software.
You can adjust volume by using the Volume button.
Capturing the currently displayed screen image
The Viewer feature allows you to capture a screen image and
store it to a flash memory card.
To capture a screen image and store it to a flash memory card;
Select "Capture" from the Settings menu and press the Enter
button on the cabinet or Left Click button on the remote control.
* To view the captured image
1. Select "Select File" from the Source menu and display a list of
files.
* A thumbnail (reduced image) of the first captured image will
be displayed.
2. Use the Mouse pad (+) button to move the Multi-Cursor (blue
box) to the last file and press the Enter button on the cabinet or
the Left Click button on the remote control.
* This will display the image you captured first.
Projecting Pictures a Digital Camera Took
Playing back on the LCD projector is possible if a picture meets
one of the following requirements:
* A picture that can be stored to an MS-DOS-formatted ATA
flash memory card
* A picture that can be stored as a compatible format
The on-board Viewer searches for the directory on the card to
recognize a JPEG or BMP format image as slide. Directories to
be searched for are up to two level from the root directory and
must be less than 16 directories. Although only switching folders
and slides is possible, special effects and displaying a list is not
possible.
NOTE:
* Up to 128 images can be recognized as slides for one directory.
* To use special effects, read images from a flash memory card
and edit them using the supplied software, then store them to
another flash memory card.
* If you store indexes to the flash memory card for your digital
camera using the supplied software, images taken with the
digital camera cannot be viewed on the Viewer. So preparing
flash memory cards for a digital camera and Viewer respec-
tively is recommended.
8 7 5 6
4 3 1 2
File File File File
File File File File
Multi Cursor
NOTE: The menu indicating that capturing is now performing
will be displayed during capturing. During this time do not
remove the flash memory card nor turn off the power of the
LCD projector. Doing so may destroy the data of the flash
memory card.
* When the flash memory card becomes full, replace a new
one.