Nikon Capture 3 - Manual (Page 29)

27
Connecting to a Computer
COOLPIX Series (USB Interface)
D100 (USB Interface)
Connecting to a Computer
If you are using a computer running Windows, make sure that you install Nikon Capture 3
before connecting your camera to the computer for the first time. After installing Nikon Cap-
ture 3, turn the camera on and connect it to the computer, or insert the memory card into a
card reader or a PC card slot.
For more information about connecting your camera to a computer, see the documentation
provided with your camera.
D1 / D1
X
/ D1
H
(IEEE 1394 / Firewire Interface)
Use a Reliable Power Source
To ensure that data transfer is not interrupted, be sure that the battery is fully charged. If in doubt, charge
the battery before use or use an AC adapter (available separately). If the battery is exhausted during
transfer, transfer will be interrupted and data may be lost.