Nikon Capture 3 - Manual (Page 60)

58
Windows
Windows Millennium Edition (Me)
The following explanation uses COOLPIX990 as an example.
After installing Nikon Capture 3 and restart-
ing the computer, connect your camera to the
computer using a USB cable and turn the cam-
era on. The camera will be registered auto-
matically.
If a message is displayed prompting you to insert a disk, insert the Windows Millennium Edi-
tion CD into a CD-ROM drive and click OK.
Follow the instructions below to check that the camera has been correctly registered with the
system.
Step 1
Right-click the My Computer icon on the
desktop and select Properties from the menu
that appears. The System Properties dialog
will be displayed. Click the Device Manager
tab.
Step 2
After confirming that Imaging devices is
listed in the Device Manager tab, click the plus
sign (+) to its left.
Before Connecting the Camera
Be sure to install Nikon Capture 3 before connecting your camera to the computer.