Nikon Capture 3 - Manual (Page 50)

48
Windows
COOLPIX990/COOLPIX 880
Windows XP Home Edition/Professional
The following explanation uses COOLPIX990 as an example.
After installing Nikon Capture 3 and restarting the computer, connect your camera to the
computer using a USB cable and turn the camera on. The camera will be registered automati-
cally.
Logging On
You will need to log on as Computer Administrator to register the camera.
Before Connecting the Camera
Be sure to install Nikon Capture 3 before connecting your camera to the computer.
Follow the instructions below to check that the camera has been correctly registered with the
system.
Step 1
Select Control Panel from the Start menu. In the Control Panel
window, Click the Performance and Maintenance icon to
open the Performance and Maintenance window. Click the
System icon in the Performance and Maintenance window
to open the System Properties window. Select the Hardware
tab and click the Device Manager button to open Device
Manager dialog.