Nikon Capture 3 - Manual (Page 42)

40
Windows
Device registration is now complete. Click OK to close the System Properties dialog.
Step 3
Confirm that NIKON D100, USB Disk, and USB Mass Storage Device are listed respectively
under Disk drives, Storage device, and Universal Serial Bus controllers. Double-click
each of these listings to display the associated Properties window.
If the NIKON D100 is listed under Other devices, delete this entry and then turn the camera
and off and then on again.
Step 4
The Properties dialogs for the selected devices will be displayed. Click the General tab and
confirm that This device is working properly appears under Device status. Click OK.