Nikon Capture 3 - Manual (Page 38)

36
Windows
Device registration is now complete. Click OK to close the System Properties dialog.
Step 3
Confirm that Nikon Digital Camera USB Device, Generic Volume, and USB Mass Stor-
age Device are listed respectively under Disk drives, Storage volumes, and Universal Se-
rial Bus controllers. Double-click each of these listings to open the associated Properties
window.
If the Nikon Digital Camera D100 is listed under Other devices, delete this entry and then
turn the camera and off and then on again.
Step 4
The Properties dialogs for the selected devices will be displayed. Click the General tab and
confirm that This device is working properly appears under Device status. Click OK.