NEC NP-P350X - Manual (Page 197)

179
8. User Supportware
3 Input the starting password of Desktop Control Utility 1.0, and click [OK].
The “Current password” window will be displayed.
NOTE:
The character string displayed in the password field varies each time Desktop Control Utility 1.0 is started.
4 Write down the character string displayed in the password field.
Write down “PMHN” in the screen example of step 3.
5 Click [OK].
Desktop Control Utility 1.0 will be started.
Move to the room where the projector is installed, with the paper on which you have written down the password in
step 4.