NEC NP-P350X - Manual (Page 60)

42
3. Convenient Features
• NETWORK SERVICE
PJLink PASSWORD Set a password for PJLink*. A password must be 32 characters or less. Do not forget
your password. However, if you forget your password, consult with your dealer.
HTTP PASSWORD Set a password for HTTP server. A password must be 10 characters or less.
AMX BEACON Turn on or off for detection from AMX Device Discovery when connecting to the network
supported by AMX’s NetLinx control system.
TIP:
When using a device that supports AMX Device Discovery, all AMX NetLinx control system will rec-
ognize the device and download the appropriate Device Discovery Module from an AMX server.
Placing a checkmark will enable detecting the projector from AMX Device Discovery.
Clearing a checkmark will disable detecting the projector from AMX Device Discovery.
NOTE: If you forget your password, contact your dealer.
*What is PJLink?
PJLink is a standardization of protocol used for controlling projectors of different manufacturers. This standard proto-
col is established by Japan Business Machine and Information System Industries Association (JBMIA) in 2005.
The projector supports all the commands of PJLink Class 1.
Setting of PJLink will not be affected even when [RESET] is done from the menu.
• CRESTRON
DISABLE Disables Crestron Control™.
ENABLE Enables Crestron Control.
IP ADDRESS Set your IP address of Crestron server.
IP ID Set your IP ID of Crestron server.
• INFORMATION
WIRED LAN Display a list of settings of wired LAN connection.
WIRELESS LAN Display a list of settings of wireless LAN connection.
UPDATE Reflect settings when they are changed.