NEC NP-P350X - Manual (Page 206)

188
8. User Supportware
 Projecting Your Mac’s Screen Image from the Projector over
a LAN (Image Express Utility 2 for Mac)
Using Image Express Utility 2 for Mac contained allows you to send the Mac’s screen image to the projector over a
network (wired or wireless LAN).
Image Express Utility 2 for Mac runs on Mac OS X 10.2.8 or later.
It runs on both Mac OS X (PowerPC) and Mac OS X (Intel).
Hereafter, “Image Express Utility 2 for Mac” is abbreviated as “Image Express Utility 2”.
What you can do with Image Express Utility 2
• Via the network images on the screen of your Mac can be sent to the projector and projected on the screen.
• One computer can send images to more than one projector.
Operating environment
Supported OS
Mac OS X 10.2.8 or later required
Mac OS X 10.3.0 or later recommended
Processor (CPU)
PowerPC G3 600 MHz processor required
PowerPC G4 800 MHz or higher recommended
or
Intel Core Solo 1.5 GHz or higher required
Memory
256 MB or higher required
Network environment
Wired or wireless LAN required that supports TCP/IP
Only the AirPort and AirPort Extreme wireless LAN cards are guaranteed to work with Image Express Utility 2.
“Easy Connection” supports only AirPort and AirPort Extreme.
Supported resolution
VGA (640 × 480) or higher required
XGA (1024 × 768) recommended
(1024 Ч 768 - 1280 Ч 800 recommended for P350W)
Supported screen colors
32 thousands of colors, 16.7 million colors required
* 256 or fewer colors are not supported.
Connecting the projector to a LAN
Connect the projector to the LAN by following the instructions in “Connecting to a Wired LAN” ( → page 138 ), “Con-
necting to a Wireless LAN” ( → page 139 ) and “9 Application Menus” ( → page 105 )