Nokia 12 GSM MODULE REMOTE I/O - Manual (Page 11)

4. GETTING STARTED
4.1 SETTING UP THE CONFIGURATOR ENVIRONMENT
To use Configurator, the following tools are needed:
• Nokia 12 GSM Module (RX-2 or RX-9)
• Nokia 12 test board
• Power supply ACW-6
• Data cable AXS-3
• Antenna adapter cable
• Antenna
• SIM card
All items listed above, except the SIM card, are included in Test board sales
package. Configurator can be used with a SIM card inserted to the test board
SIM card holder. To use Configurator:
1. Mount the Nokia 12 GSM Module on the 60-pin connector of the test board.
2. Insert the SIM card into the test board SIM card holder.
3. Connect the antenna to the Nokia 12 GSM Module with the antenna adapter
cable.
4. Connect the data cable AXS-3 to a compatible PC and to the test board. Use
the D9 connector port 2 in the test board. To enable the connection, select
the M2M system protocol in the preferences dialog (File -> Preferences) as
the communication type.
5. Turn the switch on the test board in the following way:
6. Connect the power supply ACW-6 to the test board and to an AC wall outlet.
Note: The connection settings in the preferences dialog must be correct.
For more information on the Nokia 12 test board, refer to the Nokia 12 Test
Board Specification.
7/49