Nokia 12 GSM MODULE REMOTE I/O - Manual (Page 22)

Figure 6. Setting aliases for device commands
In the Aliasing dialog, you can replace the predefined commands with user-
specified commands (aliases). The defined alias replaces the initial command
or previous alias configured for the command. If an alias has been configured,
the original command is no longer accepted. Defining an empty alias for a
command can restore the original command. Duplicate aliases are not allowed.
Aliases can also be defined for status messages sent in response to status
queries. Thus, an alias can be defined for a command for controlling the device,
querying the status of the device (see chapter 9.1), and for the message
received in response to the query (see chapter 9.2).
18/49