Nokia 12 GSM MODULE REMOTE I/O - Manual (Page 37)

Table 8. Input_Get_Change commands for alarm functionality
Command Type Command Comments
Input_Get_Change All Term123 Input Get Change
All
Response:
INPUT_GET_CHANGE ALL:
INPUT 1: Y
INPUT 2: Y
INPUT 3: Y
INPUT 4: Y
INPUT 5: Y
INPUT 6: Y
INPUT 7: Y
INPUT 8: Y
INPUT 9: Y
INPUT 10: Y
INPUT 11: Y
The Y refers to success state and it can be:
OK or CHECK CONFIG
Alarm message, when input state has changed,
contains the following information:
INPUT 1: Y
INPUT 2: Y
INPUT 3: Y
INPUT 4: Y
INPUT 5: Y
INPUT 6: Y
INPUT 7: Y
INPUT 8: Y
INPUT 9: Y
INPUT 10: Y
The command
subscribes alarms for
all inputs at once
33/49