Nokia 12 GSM MODULE REMOTE I/O - Manual (Page 40)

Table 10. Output_Set X commands
Command Type Command Comments
Output_Set X On term123 Output_Set X On
Response:
OUTPUT_SET Z ON: OK
OUTPUT Z: ON
The X refers to output pin number, X=1,2,3,4,5,6,7,8,9.
The command sets
output pin X to ON state
and the response returns
the state of it
Output_Set X Off term123 Output_Set X Off
Response:
OUTPUT_SET X OFF: OK
OUTPUT
X: OFF
The X refers to output pin number, X=1,2,3,4,5,6,7,8,9.
The command sets output
pin X to OFF state and the
response returns the state
of it
Output_Set All On term123 Output_Set All
On
Response:
OUTPUT_SET ALL ON: OK
OUTPUT 1: ON
OUTPUT 2: ON
OUTPUT 3: ON
OUTPUT 4: ON
OUTPUT 5: ON
OUTPUT 6: ON
OUTPUT 7: ON
OUTPUT 8: ON
OUTPUT 9: ON
The command sets all
outputs to ON state and
the response returns the
state of all outputs
Output_Set All Off term123 Output_Set All
Off
Response:
OUTPUT_SET ALL OFF: OK
OUTPUT 1: OFF
OUTPUT 2: OFF
The command sets
all outputs to OFF
state and the
response returns the
state of all outputs
36/49