Connection error message, Method 2. upgrade using remote management – Nlynx MinIT6000 User Manual
Page 116
Connection Error Message
If this message appears, click on the OK button and verify that the Server Name, Directory,
User Name and Password information is correct. If it is, the Connection Error might be
caused by incorrect Network settings or a bad Ethernet connection. Please verify your LAN
connection and/or modify your Network settings. Refer to the Network section in the
Configure Terminal Properties
.
•
Restart your Terminal
After Upgrade has finished, a confirmation box will pop up to ask you to "Reset to
factory default". Click on the OK button to reset Terminal to factory default so that the
full new firmware can take effect.
Method 2. Upgrade using Remote management
If have installed “ezManager Pro” on your network, you can use this method to upgrade your
firmware. Obtain the latest version firmware
(i.e., image file named NLX422TEBxxxx.bin)
directly from the NLynx web site or by contacting technical support. For more information
on this upgrade method procedure, please refer to the "ezManager Pro User’s Manual”.