Nlynx MinIT6000 - Manual (Page 76)

5250 Printer Session Setup
1. From the terminal desktop, click on the “Connection Manager” icon (shown below) to
bring up the “Terminal Connection Manager” setup window. This is the same as
selecting Start > Programs > Connection Manager from the Taskbar Menu.
2. Once the Connection Manager window is open, select the Configure tab.
3. Click on the Add button to bring up the New Connection dialog box.
4. Select the NLynx Terminal Emulator option from the pull down list and click on the OK
button.
5. Type in a Device Name. The device name is used to identify which devices you are
using when running the emulator
6. For the Device Configuration Type, select Printer.
7. Select the Setup button to bring up the Printer Setup window.