Nlynx MinIT6000 - Manual (Page 35)

6. Click Encryption and select the level of encryption you want to use. The
default level is Basic. Select RC5 128-bit Login Only to use encryption
only during authentication.
The Citrix server must be configured to allow the selected encryption level or
greater. For example, if the Citrix server is configured to allow RC5 56-bit
connections, the ICA client can connect with RC5 56 or 128-bit encryption.
Note To use advanced encryption, you need to install SecureICA on your Citrix
server. The Citrix server must also be configured to allow the selected
encryption level or greater.
Click Next to continue.
14. The Firewall Settings screen appears:
In the Firewall Settings dialog box, you can configure the client to use a SOCKS proxy
and alternate address remapping.
15. Click Finish to save the entry or Cancel to exit the new connection entry dialog box
without saving the entry.
Once you have created a connection entry, the name appears in the list of connections in
Connection Manager.