Nlynx MinIT6000 - Manual (Page 25)

Startup
Click on the Startup button to specify which connection option you want to be
the default when the terminal first powers up. The Connection Startup dialog
box displays after the Startup button is pressed. Using the Connection Startup
dialog box, you can pre-set sessions to automatically connect to their servers
when terminal is turned on.
Connection Startup Dialog Box
Make the selected connection your default connection.
Enable this function to use the connection you selected in the "Connection
Manager" as the default connection.
Automatically start the selected connection at startup.
Enable this function to automatically start the connection you selected in the
"Connection Manager" when the terminal is turned on.
Default connection auto-start delay time:
Allows the user to adjust the auto-start delay time by changing the value. This might be
important in some networks because it allows the unit enough time to obtain DHCP
information from the DHCP server (if set for) before it tries to connect to the host.
OK
Click on OK to quit the dialog box and save the changes.
Cancel
Click on Cancel to quit the dialog box without any change.