NEC XL-6500G - Manual (Page 13)

13
1.PART NAMES AND FUNCTIONS
B HELP Button
Press to display the explanation of the current selected
function and available functions.
C SIG LEVEL Button
Press to display the SIGNAL LEVEL menu. You can set
the level for an RGB or component signal.
D GAMMA Button
Press to display the GAMMA CORRECTON menu. You
can select two options.
E ADDRESS Button
Press to display the ADDRESS menu. Pressing with CTL
allows you to specify the address for the remote control.
F PIXEL CLK Button
Press to display the PIXEL CLOCK adjustment screen.
You can adjust a picture width to the screen by adjusting
the clock frequencies to eliminate the vertical banding in
the image.
G PIXEL PHASE
Press to display the PIXEL PHASE adjustment screen.
You can adjust the clock phase to reduce video noise, dot
interference or cross talk. (This is evident when part of
your image appears to be shimmering.)
H INPUT Button
Selects menus and switches input signals.
I CAPTION Button
Press to display the CLOSED CAPTION menu.
J INFO Button
Press to display the various parameters and settings of the
currently displayed image. Pressing with the CTL button
displays some of items available.
K INPUT LIST Button
Press to display the memory list of the recorded input
signals.
L ZOOM/PAN Button
Press to display the ZOOM adjustment screen. The zoom
function enlarge or reduce the projected image. Pressing
with CTL displays the PAN adjustment screen. The pan
function enlarge or reduce the selected part of an image.
M KELVIN Button
Press to enter the KELVIN mode. You can adjust the
color temperature.
N POSITION Button
Press to enter the position mode. You can adjust the
horizontal, vertical position and horizontal, vertical
blanking and image size.
O R, G, and B Buttons
The R and B buttons are used for Uniformity only.
P CURSOR Buttons
Used for increasing and decreasing control levels, cursor
movement and convergence adjustments.
Q DELETE Button
Used to delete characters or numbers you typed.
R NORMAL Button
Returns the standard level for each signal. When pressed
once, the confirmation message will be displayed. When
“YES” is selected and ENTER is pressed, the data will be
returned to the standard level. While holding down the
CTL button, press the NORMAL button to display the
LOAD menu to select the LOAD (last stored level).
S STORE Button
Memorizes the adjustments setting of each signal sepa-
rately.
When pressed once, the confirmation message “STORE?”
will be displayed. When selecting “YES” and ENTER, the
data will be stored in memory.
T END Button
Ends the adjustment mode.
U ENTER Button
Executes menu selection and switches to selected input.
V CTL Button
Used in conjunction with other buttons, similar to a shift
key on a computer.