Riverstone Networks RS 2100 - Manual (Page 24)

2-2 Riverstone Networks RS 2100 Switch Router Getting Started Guide
Specifications RS 2100 Introduction
2.2 SPECIFICATIONS
The RS 2100 provides high-speed switching and full non-blocking throughput. The hardware provides high-speed
performance regardless of the performance monitoring, filtering, and Quality of Service (QoS) features enabled by the
software.
The following table lists the basic hardware and software specifications for the RS 2100.
Table 2-2 Basic hardware and software specifications
Feature Specification
Throughput • 8.0-Gbps non-blocking switching fabric
• 9.2 million packets-per-second routing throughput
Capacity • Up to 50,000 routes
• Up to 256,000 Layer-4 application flows
• Up to 240,000 Layer-2 MAC addresses
• 4,096 Virtual LANs (VLANs)
• 2,000 Layer-2 security and access-control filters
• 3MB input/output buffering per gigabit port
Routing protocols • IP: RIP v1/v2, OSPF, BGP v2/v3/v4, IS-IS
• IPX: RIP, SAP
• Multicast: IGMP, DVMRP, GARP/GVRP
• Network Address Translation
• Server Load Balancing
• Transparent Web Caching
Bridging and VLAN
protocols • 802.1d Spanning Tree
• 802.1Q (VLAN trunking)
• Rapid Spanning Tree Protocol (RSTP)
• Per-VLAN Spanning Tree (PVST)
Media Interface
protocols • 802.3z (1000Base-SX)
Quality of Service
(QoS) • Layer-2 prioritization (802.1p)
• Layer-3 source-destination flows
• Layer-4 source-destination flows
• Layer-4 application flows
RMON • RMON v1/v2 for each port
Management • SNMP v1/v2
• Emacs-like Command Line Interface (CLI)
Port mirroring • Traffic to specific gigabit ports