Riverstone Networks RS 2100 User Manual
Page 64
5-2 Riverstone Networks RS 2100 Getting Started Guide
Upgrading System Image Software
Managing RS 2100 Software
Note
The <image-file-name> is the full directory path and filename to the image
software file on the TFTP server.
Here is an example:
4.
Enter the
system image list
command to list the images on the internal flash memory and verify
that the new image is present:
Here is an example:
5.
Use the
system image choose
command to select the image file that the RS 2100 will use when
rebooted.
Here is an example:
6.
Use the
system image list
command to verify the change.
system image add <IPaddr-of-TFTP-host> <image-file-name>
rs# system image add 134.152.178.5 tftpboot/rs7300
Downloading image 'tftpboot/rs7300' from host '134.152.178.5'
to local image rs7300 (takes a while) . . .
download: done
save:
kernel: 100%
done
Image checksum validated.
%SYS-I-BOOTADDED, Image 'rs7300' added.
rs#
system image list
Images currently available on Master CM
slot0:
rs7300 (version 7.3.0.0)
rs7000 (version 7.0.0.0) [selected for next boot]
rs#
system image choose rs7300
Found image in slot0
Making image rs7300 (version 7.3.0.0) the active image
for next reboot on Master CM . . .
%SYS-I-CHS_PRIMARY_OK, image successfully chosen on Primary CM
rs#