Riverstone Networks RS 2100 - Manual (Page 70)

5-8 Riverstone Networks RS 2100 Getting Started Guide
Loading Software from the Network Managing RS 2100 Software
6. Reboot the RS 2100 by entering the
reboot
command at the Boot prompt.
Here is an example
rs-boot> reboot
Ethernet Base address = 00:00:1d:12:34:56
Ethernet CPU address = 00:00:1d:12:34:57
Performing Bootp with timeout in 5 seconds.
** plen = 300 plen - sizeof(struct bootp) = 0
BOOTPD='134.141.179.134'
netaddr='134.141.179.132'
* bootp source is C:\TFTPBOOT\ROS70
Booting boot file C:\TFTPBOOT\ROS70.
source: tftp://134.141.179.134/C:\TFTPBOOT\ROS70
File: version (703 bytes)
Build location: host 'matrix' by 'adm'
Version: 7.0.0.0
Build date: Mon Dec 25 23:56:47 2000
File: kernel (3568593 bytes)
Loading kernel (base 0x80001000, size 50528)
(base 0x8000d560, size 3507312)
100% - kernel loaded...
...
...
Press RETURN to activate console . . .