Radio Shack CT-600 - Manual (Page 10)

10
PREPARATION
INSTALLING THE BATTERY
To install the battery, place
the tabs on the bottom of
the battery into the slots on
the back of the phone (near
the bottom). Then move the
top of the battery toward the
phone until it locks into
place.
To remove the battery, first
be sure the phone is turned
off. Then gently push down
on the battery’s latch and lift
the battery away from the
phone.
IMPORTANT BATTERY TIPS
• You must fully charge a new battery for at least
24 hours before you first use it. See “Charging
the Battery” on Page 13.
• Use only the supplied charger and use only bat-
teries recommended for this phone.
• The battery is a sealed unit with no serviceable
parts. Do not try to open the case.
17-1105.fm Page 10 Wednesday, July 21, 1999 11:06 AM