Radio Shack CT-600 - Manual (Page 20)

20
“Calling Line ID” on Page 46), the phone auto-
matically displays the calling party’s phone
number or, if it is programmed into your phone,
the calling party’s name (see “Storing a Number
and Name in Memory” on Page 68).
• If you selected silent service (see “Ringing Op-
tions” on Page 52), the phone does not ring. In-
stead, the keypad and display backlights flash,
CALL flashes on the display (or caller informa-
tion appears), and the phone beeps once.
• If keyguard is set to ON (see “Turning Keyguard
On/Off” on Page 38), you can answer a call
only by pressing
.
To end the call, press . To clear calling line ID
information (if any) from the display, press .
If you do not answer a call, the phone displays NN
MISSED CALLS (where NN is the number of calls)
and stores the caller’s number (if available) in the
missed calls list. To review the missed calls list,
press
then press or to scroll through the
numbers. Or, press any other key (except ) to
clear the display. See “Using the Call Log” on
Page 23.
SEND
END
CLR
OK
PWR
17-1105.fm Page 20 Wednesday, July 21, 1999 11:06 AM