Radio Shack CT-600 - Manual (Page 63)

63
The phone prompts you for your PIN Code.
2. To store your PIN code in the phone’s memory
and turn on PIN code dialing, enter your PIN
code (maximum of 4 digits) and press
. The
phone briefly displays PIN CALL ON .
To turn off PIN code dialing, simply press
without entering a number.
PIN CALL OFF ap-
pears briefly.
When PIN code dialing is set to ON, the phone dis-
plays
PIN CALL after you press to place a
call. WAIT FOR PROMPT appears. When you hear
the tone, press again to automatically dial
your stored PIN code.
The phone displays SENDING PIN ... If the mes-
sage remains on the display, press again to
resend the PIN code. Wait for your call to be con-
nected.
Notes:
• When PIN code dialing is set to ON, you can
place a call to the emergency number pro-
grammed into your phone (as usual) without
sending the PIN code.
• If you place a call using a cellular service that
does not support PIN code dialing (and PIN
OK
OK
SEND
SEND
SEND
17-1105.fm Page 63 Wednesday, July 21, 1999 11:06 AM