Radio Shack CT-600 - Manual (Page 56)

56
Erase deletes the stored information. To verify
that you want to do this, press at the
ERASE? prompt. Or, press if you don’t
want to erase the stored information.
5. The phone prompts SELECT DIALING SE-
QUENCE . Press to change the setting. Or,
press or to exit the menu.
Press or to scroll through these four dial-
ing sequence options, and press to choose
one:
Access No. +Phone No. +Card No. —
Use for cards that require you to enter a 1-800
access number first, followed by a phone num-
ber after you hear a tone, then a card number
after another tone.
Access No. +Card No. +Phone No. —
Use for cards that require you to enter a 1-800
access number first, followed by a card number
after you hear a tone, then a phone number af-
ter another tone.
10xxx +Phone No. +Card No. — Use for
cards that require you to enter an access num-
ber (beginning with 10, then 3 digits), followed
by a phone number after you hear a tone, then
a card number after another tone.
OK
CLR
OK
CLR END
OK
17-1105.fm Page 56 Wednesday, July 21, 1999 11:06 AM