Roland KR-17 - Manual (Page 126)

126
Chapter 6 User Program Registration
Chapter 6
■ Coping Sets of User Programs
Stored in the User Memory to
Floppy Disks
You can take User Program sets saved in user memory and
copy them to floppy disks.
In this case, in the Copy User Programs screen in Step 4
above, touch the large arrow icon in the center to get the
arrow to point up. This sets the KR to copy the User Program
set in the user memory to the floppy disk.
The rest of the procedure is identical to that used for copying
sets of User Program set from disks to user memory.
Using the Pedal to Switch
User Programs
You can use the Pedal as a dedicated switch for selecting
User Programs in order.
1. Press the [User Program] button.
2. Touch <Option> in the lower part of the screen.
3. Touch to display screen like the
following.
fig.d-upgopt.eps_50
4.
Touch to select the setting.
Touch <Exit> to return to the User Program screen.
Simultaneously Switching
User Program and
Transmitting PC Numbers
You can have PC (Program Change) numbers be transmitted
to an external MIDI device when you switch the User
Program on the KR.
You can register PC number settings to each of the User
Programs, just as you can with button settings and other
settings preferences.
Calling Up the Performance Settings to Be Set
1. Press the [User Program] button, then touch the name
of the performance setting you want to set.
Setting the Transmission of the PC
2. Touch <PC Set> in the User Program screen.
The following type of screen appears.
fig-upgPCset.eps_50
3.
Touch for the parameter and make the
settings.
4.
Touch <Exit>.
The User Program screen returns to the display.
Touch <Write> to save the setting to the User Program.
For more detailed information, refer to “Saving
Performance Settings (User Program)” (p. 122).
Display Explanation
Off
You can use a function assigned to the
pedal.
Left Pedal
The left pedal is dedicated to switching
User Programs.The function assigned to
the left pedal cannot be used.
Center Pedal
The center pedal is dedicated to
switching User Programs.The function
assigned to the center pedal cannot be
used.
Display Description
Tx PC
Channel
This prevents the PC number from being
transmitted (Off), or sets the transmission
channel (Channel 1–16).
Bank
Select MSB
Sets the Bank Select MSB.
Bank
Select LSB
Sets the Bank Select LSB.
Program
Change Sets the Program Change messages
(Program Numbers).
KR-17_15_e.book 126 ページ ２００４年１２月６日 月曜日 午後１時５４分