Roland KR-17 - Manual (Page 176)

176
Chapter 10 Connecting External Devices
Chapter 10
Connecting to Audio
Equipment
When you connect the KR to audio equipment, you can play
the sounds from the KR through the speakers on the audio
equipment or record your performances on a tape recorder
or other recording device.
When connecting, please use audio cables (sold separately)
with standard phone plugs.
■ Connectors
fig.09-
Input Jacks
You can connect another sound source, such as audio
equipment or an electronic instrument, using audio cables
(sold separately). Play the sounds from the connected device
through the speakers on the KR.
If the input of the connected device is monaural, you must
use the L (Mono) jack.
* You cannot use the KR to adjust the volume of the connected
sound generating device.
Output (Main) Jacks
You can connect audio equipment using audio cables (sold
separately) and play the sounds from the KR through the
speakers on the connected equipment, or record your
performances on a tape recorder or other recording device.
If the input of the connected device is monaural, you must
use the L (Mono) jack.
Output (Aux) Jacks
Select this when playing the keyboard performance through
the KR’s internal speaker and the accompaniment sound
through an amp or speaker connected to the Output (Aux)
jack.
■ Making the Connections
* To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power
on all devices before making any connections.
Playing Sounds from the KR Through the Speakers
on Audio Equipment or Recording Your
Performances on a Recording Device
fig.09-
1. Turn the volume all the way down on the KR and on
the device you’re about to connect.
2.
Turn off the power to the KR and other connected
equipment.
3. Use audio cables (sold separately) to make the
connection.
4.
Switch on the KR.
5. Switch on the connected device.
6. Adjust the volume level on the KR and the connected
device.
Recording KR Performances on a Recording Device
7. Start recording with the connected device.
8. Play the keyboard.
9. When the performance ends, stop recording on the
connected equipment.
Playing Audio Equipment Sounds Through the
Speakers on the KR
fig.09-
1. Turn the volume all the way down on the KR and on
the device you’re about to connect.
2.
Turn off the power to the KR and other connected
equipment.
3. Use audio cables (sold separately) to make the
connection.
4.
Turn on the connected equipment.
Input R/L
(Line In, Aux In)
Bottom of the KR
Output R/L
(Line Out)
Bottom of the KR
KR-17_15_e.book 176 ページ ２００４年１２月６日 月曜日 午後１時５４分