Roland KR-17 - Manual (Page 82)

82
Chapter 3 Song Playback
Chapter 3
Playing Back Songs on CDs (Only for Instrument Equipped with CD Drive)
■ Cautions
Handling CDs
• Do not leave discs exposed to direct sunlight for extended
periods.
• Handle CDs with your finger and thumb, holding the disc
by the center hole and outer rim. Do not touch or scratch
the disc’s recording surface (the green side).
• Do not drop or stack discs.
• Do not place heavy objects on discs or subject them to
strong impact.
• Do not affix stickers or other such materials on the label
side. Placing stickers on the disc may result in errors when
data writing and scratch the disc.
• Use a felt-tip marker or other soft-tipped implement to
write titles and other information on the label side of
discs.
• Store discs in their original cases or other suitable cases for
protection.
• Before using the CD, please read the warning on the CD
cover.
Cleaning Discs
• If a disc becomes dusty or soiled, gently wipe the disc
with a soft cloth. Always wipe outwards from the center
using light, gentle strokes. Do not wipe the disk in a
circular pattern.
Precautions Concerning Use of the CD
• CD-R/RW discs to which audio tracks have been added,
and CDs with mixed audio tracks and data will not play
back properly.
• The KR is capable of playing back only commercial CDs
that conform the official standards—those that carry the
“COMPACT DISC DIGITAL AUDIO” logo. The usability
and sound quality of audio discs that incorporate
copyright protection technology and other non-standard
CDs cannot be guaranteed.
• For more detailed information on audio discs featuring
copyright protection technology and other non-standard
CDs, please consult the disc vendor.
• You cannot save songs and styles to CDs, and you cannot
delete songs or styles recorded to CDs. Furthermore, you
cannot format CDs.
• The prescribed format for CD-R/RW discs is “ISO9660
Level 1 Mode 1.” You may be unable to read using other
formats.
Insert the CD in the CD Drive
1. Press the eject button and open a disc tray.
2. Put a CD on a disc tray.
3. Press the eject button again to close the disc tray.
Removing a CD
1. Press the eject button and open a disc tray.
2.
Remove the CD from the disc tray.
If a disc tray does not open
If the power is turned off with the disc still in the drive
(such as due to a power failure), the disc tray cannot be
opened by pressing the eject button. In this case, you can
insert a piece of wire to force the tray open.
NOTE
Make sure the KR’s power has been turned OFF before
attempting to engage the emergency eject hole. If you insert
something while the power is on, the disc could be damaged, or
unexpected problems may occur.
Emergency eject hole
KR-17_15_e.book 82 ページ ２００４年１２月６日 月曜日 午後１時５４分