Roland KR-17 - Manual (Page 37)

37
Chapter 1 Performance
Chapter 1
■ Broadening the Reverb Sound
1.
Connect amp or external speaker to the Aux jack.
2.
Press the [Surround] button and watch the indicator light up (p. 35).
3.
Touch <Surround Reverb>.
The following “Surround Reverb screen” appears.
The reverb sounds from the external speaker and the KR’s internal speaker.
When you touch <Exit>, the Surround effect is activated, and you return to the
previous screen.
Cancelling the Effect
4.
Press the [Surround] button and watch the light go out.
The Surround effect is eliminated, and the effect is no longer applied to any of the
parts.
■ Changing the Amount of Surround Reverb
1.
Press the [Surround] button and watch the indicator light up.
2.
Touch <Surround Reverb> to display the Surround Reverb screen.
3.
Touch <Options>.
4.
Touch the “External” and “Internal” sliders to adjust the volume levels
of the external speaker and the KR’s speaker.
The Surround Reverb volume is adjusted.
When you touch <Exit>, you return to the Surround screen.
NOTE
You cannot use both
“Surround Accomp” and
“Advanced 3D”
simultaneously with
“Surround Reverb.” When
“Surround Accomp” is on, the
reverb sound is broadened as
well.
You can use the Memory
Backup function to store these
settings to the KR (p. 164).
KR-17_15_e.book 37 ページ ２００４年１２月６日 月曜日 午後１時５４分