Connecting an external display, Making the connections, And display lyrics (p. 23) – Roland KR-17 User Manual

Page 23

Advertising
background image

23

Before You Start Playing

Before You

Start Playing

Connecting an External

Display

You can connect a computer monitor or other such external
display to the instrument, and display scores and lyrics on
the larger screen, and display whatever images as you like.

For more about the external display settings, refer to
“Changing the Settings for Showing Images with the
External Display (External Display)” (p. 163). For more on
displaying images, refer to “Selecting Images To Be Shown
on the KR and External Displays (User Image Display)” (p.
163)

If your instrument came with a CD drive, you can use the remote

control to switch screens.

Displays That Can Be Connected to This Instrument

In general, a great many of the VGA monitors and multiscan
monitors that are available on the market are compatible
with this instrument. However, before you connect any
monitor, make sure it meets the following specifications:

• Resolution

640 x 480 pixels

• Horizontal scan frequency

31.5 kHz

• Vertical scan frequency

60 Hz

• Connector

3-row, 15-pin D-Sub type

• Signal

Analog

NOTE

Confirm that the display to be used is compatible with the

frequencies mentioned above. Using a display that is not compatible

with the above frequencies may result in incorrect image output

when images move, and in certain cases may even damage the

display.

Making the Connections

NOTE

To prevent malfunction and/or damage to speakers or other devices,

always turn down the volume, and turn off the power on all devices

before making any connections.

1.

Turn off the power to the KR and the display to be

connected.

2.

Use display cable (sold separately) to connect the

display to the Ext Display connector on the KR.

3.

Switch on the KR.

4.

Switch on the connected display.

For more on handling the external display, refer to your display’s

owner’s manual.

Turning the Power Off

After use, turn off the power using the following procedure.

1.

Turn the volume all the way down on the KR.

2.

Turn off the KR.

3.

Turn off the connected display.

External Display

KR Bottom

Ext Display Connector

D-sub 15 pin

(Mini)

D-sub 15 pin

(Mini)

Display Cable

(Sold separately)

KR-17_15_e.book 23 ページ 2004年12月6日 月曜日 午後1時54分

Advertising
This manual is related to the following products: