Radio Shack TFX-1031 - Manual (Page 16)

16
Storing a Number for
Memory Dialing
You can store up to 30 telephone or
fax numbers into two-digit memory
dial locations. You can then dial the
number by pressing
MEMORY and
then entering the two-digit number
where you stored it.
Note: To stop storing a number, press
STOP any time before Step 4. The fax
machine returns to standby. If neces-
sary, start over again.
1. Press and hold MEMORY until the
fax machine displays:
: STORE MEM. DIAL
: MEM. NO[01-30] ??
2. Enter a two-digit location number
(01 through 30) where you want to
store the number.
: MEM.NO[01-30] 01
3. Enter the number you want to
store (up to 34 digits).
: TEL.:9P4602778
Note: Press REDIAL/PAUSE to
insert a 2-second pause between
numbers. The fax machine dis-
plays
P at the pause entry.
4. When the number appears cor-
rectly, press ENTER .
: NAME:
5. If desired, enter the name (up to
20 characters). For details on
entering the name, see “Entering
Names” on Page 13.
: NAME:XYZ
6. Press ENTER when the name
appears correctly. The fax
machine returns to the display
shown in Step 2.
Notes:
• If you make a mistake, use DIREC-
TION < or > to move the cursor to
the incorrect digit/character and
enter the new one over it. You can
also use
INS or DEL to insert or
delete digits/characters.
• If there is a number or name
already assigned to the selected
two-digit memory dial location, the
fax machine displays the number
and name. If you want to change
the number or name, enter the
new number or name over the old
one. Otherwise, press
STOP .
43-1203.fm Page 16 Wednesday, August 18, 1999 8:37 AM