Radio Shack TFX-1031 - Manual (Page 28)

28
Note: If you use your fax machine
as both a telephone and a fax
machine, we suggest you set the
ring count to at least 4 to give you
time to answer.
Remote Receive Code — The
remote receive code lets you start
receiving a fax from a phone
plugged into the
EXT LINE jack. If
you pick up the phone and hear
fax tones, you can enter the
remote receive code so the fax
machine starts receiving the fax.
The receive code is preset to * 9 * .
You can change the middle char-
acter (0–9), but you cannot
change the asterisks (
* ).
Enter the number you want to use,
then press
ENTER .
Auto Print — Select YES to have
the fax machine automatically
print a report after every 30 faxes
(received and sent). Select
NO to
disable this feature.
5. To exit and return to standby,
press STOP twice. The fax
machine stores the options you
have changed.
CLEARING MEMORY
You can clear all or part of the infor-
mation you have stored in your fax
machine’s memory.
1. Press FUNCTION , then 4.
: [4] MEMORY CLEAR
2. Press ENTER .
3. Select the items you want to clear
by pressing DIRECTION < or > .
: TERM.ID
You can choose from these items:
1. TERM. ID
2. TX/RX JOURNAL
3. SYSTEM DATA
4. ONE TOUCH DIAL
5. MEMORY DIAL
4. When the desired item appears,
press ENTER .
: ARE YOU SURE ?
5. Press ENTER if you want to clear
the item.
: MEMORY CLEARED !
The selected memory is cleared.
6. Repeat Steps 3–5, if necessary, to
clear other items.
7. Press STOP to return to standby.
43-1203.fm Page 28 Wednesday, August 18, 1999 8:37 AM