Radio Shack TFX-1031 - Manual (Page 20)

20
SENDING FAXES
Fax Tips
To ensure the best fax transmission
results:
• Never send documents that are
excessively curled, thin, torn,
coated, or crumpled.
• Let wet ink or correction fluid on
documents dry completely before
you send them.
• Never use carbon-type paper.
Make a plain-paper copy of any
questionable document and send
the copy.
• Remove staples, paper clips, and
tape before you load a document.
Failure to do so might damage the
fax machine.
• The fax machine sends any docu-
ment from 6 (W)
×
5 (L) inches to
8 1 /
2
(W)
×
59 (L) inches.
• If a communication error occurs,
the fax machine sounds a long
warning tone. Send the fax again.
Loading a Document
Note: You can load only one sheet at
a time.
1. Turn the document face down and
gently insert the leading edge into
the feeder slot.
The fax machine automatically
pulls in the page.
2. When the document is loaded
properly, the fax machine dis-
plays:
: DOCUMENT LOADING
3. If necessary, adjust the resolution
and contrast setting according to
the type of documents. See “Set-
ting the Resolution and Contrast”
on Page 21.
: NORMAL
4. You can now send the document.
See “Dialing Fax Numbers” on
Page 21.
0 000
0 000
0 0 000
0 0
000000
0000 0 0 0 0 0
43-1203.fm Page 20 Wednesday, August 18, 1999 8:37 AM