Radio Shack TFX-1031 - Manual (Page 33)

33
CLEANING THE ROLLER
AND SCANNING GLASS
Occasionally clean the white roller and
the scanning glass to ensure a clear
fax reproduction. If you see a black
line on incoming faxes or if your sent
faxes have black vertical lines on
them, clean the roller and scanning
glass immediately.
1. Unplug the fax machine’s power
cord.
2. Open the cover by lifting up the
release lever on the side of the fax
machine.
3. Press the roller’s tabs outward
and lift the roller out of the fax
machine.
4. Release the guide by pulling it in
the direction of the arrow.
5. Gently wipe the white roller and
the scanning glass surface with
fax cleaning wipes, available at
your local RadioShack store.
6. Replace the roller. Make sure the
roller’s tabs lock into place.
7. Replace the guide. Make sure it
locks in place.
8. Close the cover so it clicks shut,
then plug in the fax machine’s
power cord.
43-1203.fm Page 33 Wednesday, August 18, 1999 8:37 AM