Roland AT900C - Manual (Page 130)

128
Using the Registration Buttons
4.
Touch <Copy>.
The Registration File Copy screen appears.
5.
Touch < > < > to select the media (the location of the
registration you want to copy).
If you want to copy a registration from USB memory, select “Ext Memory.”
If you want to copy a registration from floppy disk, select “Disk.”
6.
Touch < >< > to select the registration you want to
copy.
7.
Touch User < >< > to select the copy-destination
number.
Numbers for which a registration name is shown already have a rhythm saved
to them.
8.
Touch <Execute>.
The copying of the registration to User memory begins.
Once the registration has been accommodated in memory, the Registration
File Edit screen will reappear.
NOTE
Never remove the USB memory
or turn off the power while the
registration data is being
copied from USB memory into
the ATELIER. If you do so, the
registration data will not be
loaded into the ATELIER, and
malfunctions could result. After
returning the registration stored
in the user memory to the
factory settings (p. 230), re-
load the registration from USB
memory.
AT-900_e.book 128 ページ ２００７年９月７日 金曜日 午前８時４３分