Roland AT900C - Manual (Page 207)

205
Creating Original Accompaniment Rhythms
Creating Original Accompaniment Rhythms
Altering Voices
7. Touch < >< > to select the sound
whose voice you want to change.
8. Touch the Instrument name.
fig.RC-17.eps
9. Touch <-8><-1><+1><+8> to switch the voice.
Changing the Velocity
10. Touch < >< > to select the sound
whose velocity you want to change.
11. Touch the Velocity setting.
fig.RC-18.eps
12. Touch <-10><-1><+1><+10> to change the
velocity.
Moving Sounds
13. Touch < >< > to select the sound
you want to move.
14. Touch the “Meas Beat Tick” setting.
The note-location display uses “Measure: Beat: Tick” as
the format. A tick is a unit of time that’s shorter than a
beat.
fig.RC-16.eps
15. Touch <-30><-1><+1><+30> to move the
sound.
With the Rhythm Customize function, note locations are
expressed in terms of “Measure: Beat: Tick.” One tick is the
smallest unit used in indicating the location of the note, and
there are 120 ticks in a quarter note. Typical notes might be
indicated as shown below.
Quarter Note 8th Note
fig.RC_tick-01.eps
8th Note Triplet 16th Note
fig.RC_tick-03.eps, fig.RC_tick-02.eps
The ticks for each note have the following characteristics.
Quarter Note 0 (Every 120 ticks)
8th Note 0, 60 (Every 60 ticks)
8th Note Triplet 0, 40, 80 (Every 40 ticks)
16the Note 0, 30, 60, 90 (Every 30 ticks)
(1 measure: 1 beat: 0 tick)
1: 1: 0 1: 2: 0 1: 3: 0 1: 4: 0 2: 1: 0 2: 1: 60 2: 2: 0 2: 2: 60
1: 1: 0 1: 1: 40 1: 1: 80
3
1: 1: 0 1: 1: 30 1: 1: 60 1: 1: 90
AT-900_e.book 205 ページ ２００７年９月７日 金曜日 午前８時４３分