Adding reverberation to the sound (reverb effect) – Roland AT900C User Manual
Page 151
149
Applying Various Effects to the Sound
Applying Various Effects to the Sound
Reverb is an effect that adds a sense of spaciousness to the sound, creating
the illusion of playing in a large or small concert hall, a large or small room,
a small club, etc.
fig.05-16-1.eps
1.
Press the Reverb [
▲
] or [
▼
] buttons to adjust the overall
Reverb amount.
When you press the up button [
▲
], additional Reverb is applied. Pressing the
down button [
▼
] decreases the Reverb level. If none of the Reverb indicators
are lit, the Reverb effect will not be heard.
When you press the Reverb [
▲
] [
▼
] buttons, the Part Balance Monitor screen
appears. In the Part Balance Monitor screen you can check the reverb depth.
fig.01-27.eps
Adding Reverberation to the Sound (Reverb Effect)
Min
Max
Min
Max
Min
Max
Min
Max
The Part Balance Monitor
screen is displayed for several
seconds and then closes
automatically.
If you touch <Hold>, the screen
continues to be displayed until
you touch <Exit> again.
AT-900_e.book 149 ページ ２００７年９月７日 金曜日 午前８時４３分