Roland AT900C - Manual (Page 181)

179
Recording/Playing Back What You Play
Recording/Playing Back What You Play
3. Touch <Save/Delete>.
The Song Save/Song Delete screen appears.
fig.07-23.eps
4. Touch < > (Utility) to open the Utility
screen.
The Utility screen appears.
fig.07-24.eps
5. Touch <Rename>.
The Rename screen appears.
fig.07-25.eps
6. Touch the character select button ( )
to switch among uppercase/lowercase/
symbols.
Touch the character select button repeatedly to cycle
through the available choices, like this: uppercase
→
lowercase → symbols → uppercase...
7. Touch the screen to specify the desired
character.
The following characters can be selected.
To cancel operation, touch <Cancel>.
8. When you’re done making the settings, touch
<OK>.
The new name is now inserted.
fig.07-26.eps
You cannot directly change or edit the name of a
performance song stored on a USB memory or floppy disk.
The song must first be loaded (p. 181) into the instrument,
edited, and then saved to USB memory or floppy disk
again.
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
a b c d e f g h i j k l m n o p q r s t u v w x y z
! “ # % & ‘ ( ) * + , - . / : = ? ^ _ 0 1 2 3 4 5 6 7 8 9
Deletes a character.
Inserts a space (blank).
Move the cursor (the symbol that
indicates the location at which
characters will be input) to left or right.
NOTE
You can also access the Rename screen as follows.
1. Touch < > (Utility) on the Rec/Play screen.
The Utility screen appears.
2. In the Utility screen, touch <Edit>.
The Edit Menu screen appears.
3. Touch <Rename> on the Edit Menu screen.
The Rename screen appears.
AT-900_e.book 179 ページ ２００７年９月７日 金曜日 午前８時４３分