Raymarine hsb2 PLUS Series - Manual (Page 17)

Chapter 1: Overview 1-5
PL
U
S Di
sp
lay
Un
its
PL
U
S Di
sp
lay
Un
its
In particular, you can connect your Radar to a remote Chartplotter (or
Fishfinder/Chartplotter) to provide similar functionality to the combined
Radar/Chartplotter (or Fishfinder/Chartplotter). However, you should be
aware that if you change, say, radar range on one display, it affects all displays
showing radar (or radar/chart overlay on color displays).
The hsb 2 system can include several chartplotter displays, each with two chart
cartridge slots. Each display can access two local and up to six remote chart
cartridges. Charts can be controlled independently on each display, even when
a remote chart cartridge is being used.
Figure 1-1: hsb 2 Integrated System
PLUS Display Units
Features
• Chartplotter – Displays chart information from the C-MAP NT ® chart
cards (C-Cards)
• Uses position data from GPS, DGPS, WAAS or Loran-C technology
• Displays and transfers hsb 2 , SeaTalk and NMEA data
• Provides full control of data from other hsb 2 instruments
• Several full-screen operating modes including: Radar, Chart, Data Log or
Sonar, if appropriate data is available.
• View radar and chart simultaneously in half-screen windows.
• Half-screen windows to display additional data: Course Deviation Indica-
tor (CDI), Bearing and Distance Indicator (BDI), navigation data.
GOTO MORE! ROUTE RDR CHRT
AUTO G RZ
ft
50kHz
0
200
ZOOM MORE¬ FREQUENCY CHRT SNR
50
75
52
ZOOM FREQUENCY BTM.LOCK A-SCOPE
AUTO GCRZFH
ft
8
45 38
50kHz
0
100
SD
25
DISPLAY
RANGE
MARKS
VRM/EBL
ALARMS
GAIN
SEA
MULTI
MOB
ENTER CLEAR MENU POWER
hsb 2 Fishfinder Display
Fishfinder, Chart, Radar transferred to all displays
Pathfinder Scanner
D5569-1
hsb 2 Radar/Chart Display hsb 2 Radar Display
81186_3.book Page 5 Thursday, August 22, 2002 8:23 AM